Warranty

1. Heim L.P. warrants each new Heim press and parts thereof to the first owner operator to be free from defects in material and workmanship under normal use and service fora period of one year.

2. The obligation of Heim L.P. under this warranty is limited to making good at its factory, such parts which, within one
year after delivery to the first one year owner-operator, shall be returned with transportation charges prepaid, and
which its examination shall disclose to its satisfaction to have been thus defective in material or workmanship.

3. No claims will be allowed for parts which have been subjected to abuse or neglect, faulty installation, or where failure has been caused by accident.

4. The obligations under this warranty are void unless factory approved parts are used and proper installation procedure
is followed by the first owner-operator or his Agents. The recommendations and specifications contained in HEIM L.P.
INSTRUCTION OPERATION MANUAL must be followed.

5. Heim L.P. reserves the right to improve its product through changes in design or material without being obligated to incorporate such changes in presses of prior manufacture.

6. Heim L.P. accepts no responsibility for collateral liability through the failure of any press or parts. ‘Collateral
liability’ shall include, but not be limited to, damage to materials, loss of time, cost or rental of replacement, freight
charges, and damage to other machines.

7. Heim L.P. neither assumes nor authorizes any other person to assume for Heim L.P. any liability or expense in the replacing of parts or servicing of presses within the warranty period, except when such expense be authorized in advance and in writing by Heim L.P.

8. This warranty shall be void unless the first owner-operator, within ten days of delivery of such press to him or it, shall complete the attached Warranty Activating Card and mail it to Heim L.P.

9. This warranty is in lieu of all other warranties, statutory, express or implied, and of all other obligations or liabilities on the part of Heim L.P. and does not extend to other trade accessories, inasmuch as they are usually warranted separately by respective manufacturers.

10. All equipment is sold without operator safeguards to
the point(s) of operation. Customer takes full responsibility for insuring that equipment is properly guarded, used and maintained (including but not limited to fences, point of operation devices, etc.) in accordance with OSHA regulations governing the care, operation, and use of such equipment, as they may be amended from time to time.