 |
| Model 6SS72 (60 Ton) |
| The design of these straight side presses allows the stamper to choose from a wide range of strokes and shut heights. Available in 40, 60, 80, and 100 ton, these models have a two point design and are equipped with many standard features. An eccentric shaft drive is offered on the 40 and 60 ton models; the 80 and 100 ton machines have a crankshaft drive system. Large standard bed areas (up to 100"X30") that can also be customed fabricated to suit your specific requirements makes these presses some of the most popular in the Rousselle line. These are standard models that are easily customized to meet your needs making them a valued selection. |
| |
 |
| Model 8SS100 (80 Ton) |
| |
|
| 40-100 Ton Rousselle Two Point Straight Side |
| |
| Características Estándar |
-Steel Fabricated
-Air Clutch
-Shoe Brake (40 and 60 ton)
-Disc Brake (80 and 100 ton)
-Wrist Pin Connection
-V Gib (40 and 60 ton)
-45 Degree Gib (80 and 100 ton)
-Air Counterbalance System
-Eccentric Shaft Motion (40 and 60 ton)
-Crankshaft Motion (80 and 100 ton)
-Bolster Plate
-One Shot Lubrication
-Manual Slide Adjustment
-Solid State Press Control (ANSI B11.1)
-Nema 12 Enclosure Mounted on Press
-Operator Station with Dual Run, Emergency Stop and Stop on Top Buttons
-Supervisory Key Selector Switch for Off, Single Stroke, inch or Continuous Mode
-Brake Monitor
-Motion Detector
-Dual Air Valve
-Pressure Switches for Clutch/Brake and Counterbalance
-Forward/Reverse Feature
-Stroke Counter |
| |
| Características Opcionales |
-Self-Monitoring Automatic Lubrication System
-Power Slide Adjustment with Digital Position Indicator
-Stroke Lengths other than Standard
-Additional Shut Heights
-Custom Bed Sizes
-T-Slotted Bolster
-Bolster Burnout
-Special Drilling and Machining
-Custom Speeds
-Variable Speed Drive
-Stroke Counter
-Remote Mounted Controls
-Tonnage Monitor
-Additional Operator Station |
| |
| Specifications |
Chart 1
Two Point Straight Side 40 and 60 Tons
|
Chart 2
Two Point Straight Side 80 to 100 Tons
|
| |
|
