 |
| Model S2-250 (250 Ton) |
| The Rousselle two point straight side is tie rod constructed, offered in 150, 200, 250, 300, and 400 ton capacity. This series of straight sides is offered in various bed sizes and in both single geared and double geared designs providing a wide range selection of speeds, with a 1/4" rating with standard press strokes. These presses are a popular choice for users whose needs require large bed sizes, or an alternate choice to the two point gap where die requirements call for the more rigid straight side design. These straight sides are equipped with all the features usually expected in these models providing a cost advantage and when equipped with optional features this press is an exceptional value. |
| |
|
| 150-400 Ton Rousselle Two Point Straight Side |
| |
| Standard Features |
-All Welded Steel Frame with Double-Wall Bed Construction
-Pre-stressed Tie Rods Ensure Minimum Deflection
-Drive Capacity Rated 1/4" Above Bottom of Stroke
-Eccentric Geared Drive
-Adjustable 8 Point Gibbing
-Air Counterbalance System
-Combination Air Clutch and Brake
-Solid State Press Control (ANSI B11.1)
-Above Floor Construction
-Powered Slide Adjustment with Digital Position Indicator
-Bolster Plate
-Self-Monitoring Automatic Lubrication System
-Ball Type Adjustment Screw with Bronze Seat
-Operator Station with Dual Run, Emergency Stop and Stop on Top Palm Buttons
-Supervisory Key Selector Switch for Off, Single Stroke, Inch, or Continuous Mode
-Brake Monitor
-Motion Detector
-Dual Air Valve
-Forward/Reverse Feature
-Stroke Counter |
| |
| Optional Features |
-Stroke Lengths other than Standard
-Shut Heights other than Standard
-T-Slotted Slide and Bolster Plate
-Pedestal for Operator Station
-Variable Speed Drive
-Custom Bed Sizes
-Hydraulic Overload
-Die Cushions
-Flywheel Brake
-Tonnage Monitor
-Console Mounted Controls
-Custom Speeds |
| |
| Specifications |
Chart 1
Two Point Straight Side 150 to 400 Tons
|
| |
|
