 |
| Model 4B48 (40 Ton) |
| OBI and OBS standard frame design (see B and K series) with an adjustable bed model (W series) offered as an optional feature. Flywheel drive available in 40 and 60 ton models. Single and twin end gear drives available 40-100 ton. These models are ideal for stampers requiring maximum flexibility. |
| |
 |
| Model 10K48 (80 Ton) |
| |
 |
| Model 6W60 (60 Ton) |
| |
|
| 40-100 Ton Rousselle Two Point Gap Frame |
| |
| Standard Features |
-Steel Fabricated
-Air Clutch
-Shoe Brake (40 and 60 ton)
-Disc Brake (80 and 100 ton)
-Wrist Pin Connection
-V Gib (40 and 60 ton)
-45 Degree Gib (80 and 100 ton)
-Air Counterbalance System
-Eccentric Shaft Motion (40 and 60 ton)
-Crankshaft Motion (80 and 100 ton)
-Bolster Plate
-One Shot Lubrication
-Manual Slide Adjustment
-Solid State Press Control (ANSI B11.1)
-Nema 12 Enclosure Mounted on Press
-Operator Station with Dual Run, Emergency Stop and Stop on Top Buttons
-Supervisory Key Selector Switch for Off, Single Stroke, Inch or Continuous Mode
-Brake Monitor
-Motion Detector
-Dual Air Valve
-Pressure Switches for Clutch/Brake and Counterbalance
-Forward/Reverse Feature
-Stroke Counter |
| |
| Optional Features |
-Self-Monitoring Automatic Lubrication System
-Power Slide Adjustment with Digital Position Indicator
-Stroke Lengths other than Standard
-Additional Shut Heights
-Custom Bed Sizes
-T-Slotted Bolster
-Bolster Burnout
-Special Drilling and Machining
-Custom Speeds
-Variable Speed Drive
-Stroke Counter
-Remote Mounted Controls
-Tonnage Monitor
-Additional Operator Station
-Adjustable Bed |
| |
| Specifications |
Chart 1
Two Point Gap Frame 40 and 60 Tons
|
Chart 2
Two Point Gap Frame 80 and 100 Tons
|
Chart 3
Two Point Gap Frame Adjustable Bed 40 and 60 Tons
|
| |
|
