 |
| Model G1-55 (55 Ton) |
| Offered as OBI, OBS, non-geared, geared and optional deep throat, horn and adjustable bed models, these presses are available in tonnage capacities from 32-300 ton. Standard quality features such as a Solid State Press Control and the Low Inertia Combination air clutch and brake, make these steel fabricated presses impressive values. Longer stroke length and shut heights are offered as an option. The Rousselle 150 to 300 ton Single Point OBI and OBS presses have a 1/4" rating with standard stroke (geared models). |
| |
 |
| Model G1-200 (200 Ton) |
| |
 |
| Model G1-95 (95 Ton Deep Throat) |
| |
 |
| Model 40H (40 Ton Horn) |
| |
|
| 32-300 Ton Rousselle Single Point Gap Frame (Steel-Fabricated) |
| |
| Standard Features |
-Steel Fabricated
-Combination Air Clutch and Brake
-Crankshaft Motion
-Ball Type Adjustment Screw with Bronze Seat
-Multiple V Gibbing (32-120 tons)
-Adjustable 8 Point Gibbing (150-300 tons)
-Air Counterbalance System (55 ton & up)
-Bolster Plate
-One Shot Lubrication (32-120 tons)
-Self Monitoring Automatic Lubrication System (150-300 tons)
-Slide Adjustment Powered by Air Wrench (55-120 tons)
-Powered Slide Adjustment with Digital Position Indicator (150-300 tons)
-Solid State Press Control (ANSI B11.1)
-Nema 12 Enclosure Mounted on Press
-Operator Station with Dual Run, Emergency Stop and Stop on Top Palm Buttons
-Supervisory Key Selector Switch for Off, Single Stroke, Inch, or Continuous Mode
-Brake Monitor
-Motion Detector
-Point of Operation Guard Interlock
-Dual Air Valve
-Pressure Switches for Clutch/Brake and Counterbalance
-Forward/Reverse Feature
-Stroke Counter
|
| |
| Optional Features |
-Deep Throat, Horn, and Adjustable Bed Frames
-Self-Monitoring Automatic Lubrication System
-Stroke Lengths other than Standard
-Additional Shut Heights
-Custom Bed Sizes
-T-Slotted Bolster
-Bolster Burnout
-Special Drilling and Machining
-Die Cushions
-Pneumatic Flywheel Brake
-Shaft Extension
-Custom Speeds
-Variable Speed Drive
-Bar Turnover with Key Selector Switch
-Pedestal for Operator Station
-Tonnage Monitor
-Console or Remote Mounted Control
-Additional Operator Station
-Shut Height Indicator (except 32 ton models)
-Hydraulic Overload System (150-300 tons) |
| |
| Specifications |
Chart 1
Single Point Gap Frame 32 to 120 Tons
|
Chart 2
Single Point Gap Frame 150 to 300 Tons
|
| |
|
